The latest offering in Maxon's line of superior Analog Delays the AD999 Pro takes the features of the AD-9 Pro and AD999 and combines them into a single powerful package. The AD999 Pro offers 900 milliseconds of pristine analog delay tone thanks to 4 custom-made Maxon Bucket Brigade IC's. Delay repeats are then filtered using Maxon's proprietary RMS noise reduction circuitry to provide the richest smoothest most quiet analog delay tone available. Using multiple feedback loops Delay Repeats can then be selected by the user in a variety of combinations to provide complex multi-tap delay signals and rhythmic delay effects. Topped off with stereo (wet/dry) outputs and mechanical true bypass switching the AD999 Pro raises the bar for what Analog Delay enthusiasts should expect from an effect pedal.[]More detail ...

An updated version of the coveted 1970’s Jetlyzer the Maxon Vintage Jet Riser combines a VCA VCF and analog Flanger circuit to recreate the thunderous jet-plane swoosh of that holy-grail pedal plus a variety of new and unique effects including filtered chorus and tremolo jet-slap Bass and more! Featuring true bypass switching a high-performance noise reduction system and internal voltage stabilizer the VJR-9 combines vintage tone with modern performance. The sky’s no longer the limit with the Maxon Vintage Jet Riser![]More detail ...

The latest in the Maxon Nine Series the PT-9 Pro+ Phase Shifter takes compact effects to a new level! More than a reissue the PT-9 Pro+ features a completely redesigned circuit that is superior to the original. 12-stage optical phasing offers the liquid fluid sounds of legendary 70s units without the vintage hassles. Rate Depth and Feedback controls offer complete control of the phasing effect while Rate status LED allows for accurate matching of phasing sweep with song tempo. 18-volt circuitry provides maximum head room with ultra-low noise operation and full frequency response for use with any instrument. Experience shimmering liquid phasing the likes of which you have not heard before - experience the Maxon PT-9 Pro+!

• 4-stage optical phase shifter with rate depth and feedback controls and rate status LED


• 18-volt circuitry provides maximum head room with ultralow noise operation


• Ideal for use with any instrument

More detail ...

The AD999 Pro takes the features of two of Maxon's most advanced delay units and combines them into a single powerful package. Based around Maxon's popular AD999 circuit and featuring the same four custom-made Maxon MC4107D bucket brigade ICs the Pro offers the same 900 milliseconds of fat warm analog delay tone as that top-selling model.

• Input Impedance 500K Ohms


• Output Impedance 10K Ohms or less


• Residual Noise -100 dB (IHF-A)


• Delay Time 80-900 milliseconds


• Accessories: Maxon AC Adaptor (AC2009)

More detail ...

The CP101 Compressor provides clean smooth compression with ultra-low noise and incredible transparency. The CP101's 4:1 compression ratio is so subtle that it's easy to forget the unit is on until you turn it off that is.

• Works perfectly with bass guitar electric guitar or acoustic/electrics


• Provides clean compression and minimal noise

More detail ...

It’s with great pride that Maxon introduces the OD-9 Pro+ Overdrive. At long last an overdrive unit that meets and exceeds the demands of the market and deservedly takes its place beside the legendary 808. While developing the OD-9 Pro+ Maxon enlisted the help of an advisory board of professional guitarists to create a new classic overdrive pedal. Starting with the basic OD-9 circuit the OD-9 Pro+ adds a low-noise NEC uPC4570 OP-Amp in the output stage that allows for less compression and a more balanced frequency response. Increased Output level and true undistorted signal at zero Drive are further benefits of this component swap. The OD-9 Pro+ offers a switchable Boost feature that bumps the midrange by +3dB and the overdrive level by +10dB creating a thicker slightly compressed overdrive tone. Bright Singing sustained notes and improved harmonic response are further benefits of this new feature. If you always felt that the OD-9 was a bit anemic the Pro+ Boost Mode is just what the doctor ordered. The Pro+ also features the addition of a stabilized DC-DC voltage converter in the power circuit of the Pro+. This voltage converter bumps 9 volts up to 18 volts offering a much wider dynamic range and increased head room. Operating voltage is switchable between 9 and 18 volts offering a choice between the classic OD-9 tone and this newer full-frequency tone. The OD-9 Pro+ features True Mechanical Bypass switching courtesy of a 4PDT switch. With the combination of these new features and circuitry the Maxon OD-9 Pro+ effectively functions as a 4-voiced monster offering everything from the classic bluesy tones of the original 808 to the searing saturated chunk demanded by today’s extreme metal music.[]More detail ...

The all-new CS-9 Pro offers dramatic improvements over the standard CS-9. In addition to Rate and Depth controls the CS-9 Pro features a Delay Time control that allows for a vast array of interesting spatial effects. Dry Blend control allows mixing of dry and effected signals to further increase tonal options while maintaining unity gain. True Stereo outputs allow for mono stereo or inverted mono signal routing. The CS-9 Pro uses the Panasonic MN3207 BBD IC chip for the ultimate analog chorus effect.

• For even more versatility the CS550 features a front-mounted Dry Blend control that determines the level of effected signal vs. dry signal making the CS-9 Pro perfect for use with Bass Guitar as well


• True stereo outputs allow for mono stereo or inverted mono (90 degrees out of phase) signal routing


• The CS-9 Pros performance is kept exceptionally quiet thanks to a Signetics #NE570 compander and true bypass switching using a 4PDT mechanical switch

More detail ...

The TOD-9 True Tube Overdrive is unarguably the most tube-amp sounding overdrive on the market - due in no small part to the fact that is has a vacuum tube inside! Based around a Subminiature Mil-spec tube running at 30 VDC the TOD-9 uses a unique "pre-tube" circuit configuration that cascades the tube output into a solid-state distortion circuit. The result is a warm yet powerful guitar tone that is incredibly interactive with the player's performance much like a hard-working tube-amp. Featuring Drive Tone Level and Tube controls the TOD-9 allows the user to tailor the tone from a subtle overdrive boost to fully saturated sonic glory. Mechanical true bypass switching allows for clean unaltered guitar tone in bypass.

• Input Impedance: 500K Ohms


• Output Impedance: 10K Ohms or less


• Maximum Gain: 48.5 dB (1.6 KHz)


• Internal Circuit Voltage: 30 VDC (DC-DC Converter)


• Current Consumption: 260 mA / 9 VDC

More detail ...

Updated version of Maxon OD820. Combination clean booster/overdrive Switchable 9 or 18 volt operation using internal voltage doubler. Reacts precisely to picking dynamics. True Bypass Switching. Used by Scott Henderson

• Switchable 9 or 18V operation


• Reacts to picking dynamics


• True Bypass

More detail ...

Housed in Maxon's industry-standard 9-Series chassis the PAC-9 Pure Analog Chorus takes the core design of the CS505 and brings it into the 21st century. The PAC-9 Features the same basic Speed and Depth controls as the CS505 but the PAC-9's oscillator has been modified with a wider adjustable rate of 0.33Hz - 8Hz. Slow and wide spatial effects as well as rotary speaker simulations are now available that were impossible with the original '505.

• Input Impedance: 500K Ohms


• Output Impedance: 10K Ohms or less


• Maximum Output Level: +9 dB (400 Hz)


• Speed Frequency: .33 Hz 8 Hz


• Residual Noise: -95 dB (IHF-A)

More detail ...

The new Maxon AD999 is the ONLY 900 millisecond current-production analog delay on the market. Featuring eight Maxon MN3107D analog BBD ICs the AD999 features all the rich warm organic tone of its predecessors with increased delay time stereo outputs and true bypass switching for transparent noise-free operation. From bathtub slapback to sound-on-sound texturing to runaway spaceship feedback loops nothing even comes close to the AD999. When you're ready for the ultimate analog experience the Maxon AD999 is the only serious choice in an otherwise digital world!

• 8 Maxon MN3107D BBD's for 900ms of analog tone


• Standard delay time delay level and feedback controls


• Transparent noise-free operation in bypass


• Sturdy construction


• 9V DC operation

More detail ...

Based on the now-defunct Maxon CS505 Stereo Chorus the PAC-9 takes that venerable design and brings it into the 21st century. Featuring an improved oscillator section the PAC-9 can perform rotary-speaker simulations and tremolo-chorus effects that were not previously attainable with the CS505. Pure and Bright switches provide a variety of useful chorus effects while performance is kept dead-quiet thanks for Maxon's proprietary RMS noise reduction circuitry. Topped off with inverse stereo outputs and mechanical true bypass switching the PAC-9 is the future of analog chorus effects![]More detail ...

The FL-9’s 100% analog signal path uses the Panasonic MN3207 BBD IC to create some of the richest thickest flanging and time-delay effects possible. Rate Depth and Regeneration controls allow the user to dial in everything for shimmering chorus and vibrato to hollow metallic overtones to thick jet-like flanging sweeps. In addition to standard controls the FL-9 features a Delay Time knob that allows for a vast array of all-new spatial effects. Silent operation makes the FL-9 at home on the stage or in the studio.

• Input Impedance: 500K Ohms


• Input Jack: 1/4 inch standard phone jack


• Output Impedance: 10K Ohms


• Output Jack: 1/4 inch standard phone jack


• elay Time: 1.0 mSec to 12.8 mSec

More detail ...